Using Your MyElle™
“THE BODY IS THE MOST BRILLIANT COMPUTER THAT WAS EVER DESIGNED. THERE WILL NEVER BE A COMPUTER SMARTER THAN THE HUMAN BODY. GIVEN THE PROPER ENCOURAGEMENT AND THE PROPER INFORMATION, THE BODY HEALS ITSELF.”- HANNA KROEGER, ND
GETTING STARTED WITH YOUR DEVICE
-
Make sure to charge your MyElle™ wand for at least 12 hours before your first use.
-
Gently clean with warm water and antibacterial soap
-
For comfort, we recommend using a clear, water-based lubricant to help with insertion of the wand; a dime-sized amount is a good starting point.
-
Pay attention to avoid water splashing into the electronic controls and charging port.
MyElle™ is FDA registered and is in compliance as a low risk product that promotes a healthy lifestyle.
HOW TO USE YOUR DEVICE
STEP 1
Press and hold the power button to activate the Red and Blue lights, then select the Vibration setting or leave it off.
STEP 2
Lay back and Insert the MyElle™ lighted wand vaginally to your comfort level.
STEP 3
Treatment time is 10 Minutes 3 times per week, double treatment time for severe cases. To turn off, press and hold the power button until the lights shut off.
STEP 4
Gently clean your MyElle™ wand with warm water and antibacterial soap after each use. Rinse your MyElle™ thoroughly to ensure all soap residue is removed. Pay attention to avoid water splashing into the electronic controls and charging port. Let MyElle™ air dry. Once MyElle™ is thoroughly dry, put on the protective cap.
Press and hold the power button to activate the Red and Blue lights, then select the Vibration setting or leave it off.
STEP 2
Lay back and Insert the MyElle™ lighted wand vaginally to your comfort level.
STEP 3
Treatment time is 10 Minutes 3 times per week, double treatment time for severe cases. To turn off, press and hold the power button until the lights shut off.
STEP 4
Gently clean your MyElle™ wand with warm water and antibacterial soap after each use. Rinse your MyElle™ thoroughly to ensure all soap residue is removed. Pay attention to avoid water splashing into the electronic controls and charging port. Let MyElle™ air dry. Once MyElle™ is thoroughly dry, put on the protective cap.